Manatee County racking · Port to Lakewood Ranch
Rack Installation and Repair in Bradenton, FL
From the packing houses in Palmetto to the business parks out in Lakewood Ranch, Manatee County moves a lot of pallets. Conveyor Tek provides rack installation and repair Bradenton warehouses can book with one phone call, from new layouts to bent steel replaced the right way. It is the same rack repair and installation service we run statewide, close enough to home that we know the roads.
We are family and veteran-owned, and owner Todd Bixby has been in material handling since 1997.
Pallet Rack Reconfiguration Before Manatee County Packing Season
Winter vegetables keep the coolers and packing sheds around Palmetto and Parrish slammed from fall into spring, then things quiet down. That slow stretch in summer is the time to fix the racking. Pallet rack reconfiguration moves beam levels to fit this season's cases, adds bays where the line backed up last year, and updates load signs so they are accurate.
Plenty of rack installation and repair Bradenton growers and shippers book with us lands in that summer window, before the first trucks of the season roll in.
Warehouse Racking Installation From Port Manatee to Lakewood Ranch
Port Manatee pulls in imported produce, juice and building materials, and the warehouses that handle it run tall and busy. Out east, the Lakewood Ranch parks keep adding distribution and light manufacturing space. Both need warehouse racking installation that fits the building: aisle widths matched to the forklifts, frames anchored to the slab, beams set level and locked.
Our rack installation crew handles selective pallet racking, drive-in runs, wire decking and guarding as one racking system installation, phased so you can keep shipping.
- Layout drawings built around your loads and lift trucks
- Anchors, shims and row spacers on every run
- Column and end-of-aisle protection where trucks turn
Bradenton Pallet Rack Repair That Restores Rated Capacity
Damaged racking does not fix itself, and bent steel never gets stronger, so warehouse rack repair should happen soon after the hit. Pallet rack repair means rack upright repair with new column sections or frames, and rack beam replacement for beams that are bowed, cracked at the welds or missing locks. Our racking repair service brings matched parts so the bay can carry its rated load again.
Before we arrive, unload the damaged bay and the ones beside it and keep traffic out of the aisle. If you are on the phone looking up rack repair near me from a Bradenton dock, call us instead. We will tell you what to do first, and we are about an hour and a quarter away.
Rack Audits for Bradenton Shippers and Juice Plant Suppliers
Bradenton has smelled faintly of orange juice for decades, thanks to the big juice plant on the Manatee River, and the suppliers and cold storage around it run hard all year. A rack audit catches damage before it turns into a collapse. Bradenton rack audits check every upright, beam, connector, anchor and load sign, and the findings come back in writing. That report also helps if your insurance carrier asks how racking safety is managed. See how the walk-through works on our rack audits page.
Mezzanines and Conveyor Lines for Bradenton Plants
We install and repair industrial mezzanines for extra storage or office space over the floor. We also keep production moving with conveyor service and conveyor installation in Bradenton, mechanical and electrical, so your racks and your lines work together. Rack installation and repair Bradenton plants get from us fits right alongside that conveyor work.
What Bradenton Plant Managers Count On From Conveyor Tek
We are close enough to treat Manatee County as home turf. Here is what rack installation and repair Bradenton customers get on the job.
-
A family and veteran-owned shop
You talk to the people who run the business and do the work. No middlemen.
-
Since 1997 in material handling
Todd Bixby has spent nearly 30 years installing and fixing racking, conveyors and mezzanines.
-
Short drive, easy follow-ups
Bradenton is about an hour and a quarter from Lakeland, so a second visit for add-on bays is no big deal.
-
Work around your season
We schedule installs and big repairs around packing peaks, so the racking is ready when the volume shows up.
Rack Installation Across Manatee County and Into Sarasota
We cover Bradenton, Palmetto across the Green Bridge, Ellenton and Parrish up US-301, Lakewood Ranch along SR-70 and down into Sarasota. If you searched pallet rack installation near me anywhere between the Skyway and University Parkway, you found the right crew.
Just across Tampa Bay, we also handle rack installation and repair in St. Petersburg.
- Bradenton
- Palmetto
- Ellenton
- Parrish
- Lakewood Ranch
- Sarasota
Bradenton Racking Questions From Warehouse and Plant Managers
-
How soon can you get to Bradenton?
We are about an hour and a quarter from our Lakeland shop by I-4 and I-75. Call (863) 877-7971 between 8am and 5pm any day, or use the 24-hour emergency line, and we will give you a real arrival time.
-
When is the best time to reconfigure racking in a packing house?
The slower summer months, before fall packing season starts. That gives time to reset beam levels and add bays without fighting peak volume.
-
What should we do after a rack gets hit?
Unload the damaged bay and the bays on each side, close the aisle and call us. Do not straighten bent steel or keep loading the bay.
-
Do you install racking in new Lakewood Ranch buildings?
Yes. We lay out the racking around your pallets, forklifts and clear height, then install, anchor and level it, in phases if you need to start shipping early.
-
Do you replace bent uprights or straighten them?
We replace them. Damaged uprights get new column sections or frames, and damaged beams are swapped for new ones.
-
How often should a Bradenton warehouse get a rack audit?
Once or twice a year for most warehouses, more often for very busy ones, and any time someone reports a strike.
-
Can you work in cold storage?
Yes. We install and repair racking in coolers and freezers, and we plan the work so product stays at temperature.
-
Do you also handle conveyors and mezzanines?
Yes. We service, repair and install conveyors, mechanical and electrical, and we install and repair mezzanines.
Get Bradenton Racking Ready Before the Next Rush
Send the bay count, a few photos and what changed in your product mix. We will set a date for rack installation and repair Bradenton crews can finish before the volume shows up.
