Pallet racking · South Lake County

Rack Installation and Repair in Clermont, FL

Clermont keeps adding square footage, and every new building on US-27 or SR-50 needs racking that goes in right the first time. Conveyor Tek provides rack installation and repair Clermont businesses can schedule without a long sales process: a call, a site walk, then a crew. Our rack installation services cover new systems, relocations and fixes to racking that has taken a beating.

We are a family and veteran-owned contractor out of Lakeland. Owner Todd Bixby has worked in material handling since 1997.

Bay 01

Racking for New Warehouse Space Between Clermont and Groveland

A lot of the industrial space around here is new, and new tilt-wall buildings come with empty floors and tight move-in dates. Our racking installers lay out the rows, check clear heights against your sprinklers and lift trucks, set and anchor uprights, and hang beams at the levels your pallets need.

That covers storage rack installation for a single overflow room as easily as industrial rack installation across a full building. On older floors that are not dead level, base plates get shimmed so the uprights stand plumb instead of leaning into the aisle.

  • Pallet rack installation for new leases and build-outs
  • Warehouse rack installation in phases so you can receive while we work
  • Wire decking, row spacers, column guards and end protectors

When someone in South Lake searches rack installation near me, this is the kind of job they mean, and it is the core of the rack installation and repair Clermont crews from our shop handle.

Bay 02

Clermont Rack Repair That Replaces Steel, Not Bends It

Forklift damage is the usual story. An upright gets creased at the first beam level, a brace gets torn, an anchor gets ripped out of the slab. Our rack repair services replace the damaged parts, re-anchor the base and restore beam locks, so the bay carries its rated load again.

Straightening bent steel is not a repair. Damaged rack repair done right means swapping the component. Until we get there, unload the damaged bay and the ones on either side and keep people out of the aisle. That simple step makes the pallet rack repair faster and keeps a bad day from getting worse.

If you are searching rack repair near me from Clermont or Minneola because of a warehouse racking repair that cannot wait, call the number on this page, describe the damage, and we will tell you what to do while we are on the road.

Bay 03

Clermont Rack Inspection Before Growth Outruns Your Racks

Fast-growing operations add pallets before they add racking, and overloaded beams are the result. A rack inspection checks every upright, beam, connector, anchor and load sign and puts the findings in writing.

Some customers book scheduled rack audits once or twice a year. Others start after an insurer asks. Either way, our rack inspection services give you a list of what to fix now and what to watch, and they are the best way to keep rack installation and repair Clermont budgets predictable.

Bay 04

Clermont Mezzanine Installation and Conveyor Maintenance

When the floor fills up, the next move is usually up. We handle mezzanine installation over pick and pack areas and offices, and we keep the conveyor lines next to your racks running with conveyor maintenance that covers mechanical and electrical problems.

Warehouse shelving installation for small parts, returns and hand-pick zones often rides along on the same visit. One call, one crew.

What Clermont Facility Managers Get From a Veteran-Owned Rack Crew

Contractors come and go in a growing town. Here is why rack installation and repair Clermont customers stick with us.

The owner is on the phone

Conveyor Tek is family and veteran-owned. When you call, you are talking to people who do the work.

Rack experience going back to 1997

Todd Bixby has been installing and fixing material handling equipment since 1997.

Steel replaced, not patched

Damaged uprights and beams come out and new components go in, so repaired bays carry their rated load.

Seven-day hours for a busy town

We work 8am to 5pm every day and keep a 24-hour emergency line for damage that cannot wait.

Racking Work From Clermont Across South Lake County

We come up US-27 from Polk County, past the Four Corners sprawl and the hills that surprise everyone who thinks Florida is flat. Clermont, Minneola, Groveland, Montverde and Mascotte are all on the route, and Winter Garden is a short hop east on SR-50. Searching pallet racking installation near me or rack installation and repair near me anywhere in this stretch brings you to the same crew.

East of here we handle Kissimmee rack installation and repair along US-192, and back toward home we take on racking jobs in Winter Haven.

  • Clermont
  • Minneola
  • Groveland
  • Montverde
  • Mascotte
  • Winter Garden

Questions from Clermont

Clermont Rack Installation FAQs

Not here? Call (863) 877-7971 and ask Todd directly.

  • How quickly can you reach Clermont?

    We drive up from Lakeland on US-27, about an hour on a normal day. Call (863) 877-7971 between 8am and 5pm any day, or use the 24-hour emergency line, and we will give you a real arrival time on the phone.

  • What should we do with a rack that just got hit?

    Unload the damaged bay and the bays next to it, block off the aisle and call us. Do not try to straighten a bent upright or reseat a beam that has lost a connector.

  • Can you lay out racking for a new building in Clermont?

    Yes. We plan rows and aisle widths around your forklifts, pallet sizes and clear height, then install and anchor the racking. Bring a floor plan if you have one.

  • Do you repair racks that are already loaded?

    We repair racks safely, which means the damaged bay is unloaded before we pull any component. We can talk through how to stage the product so the rest of the aisle keeps working.

  • How often should Clermont warehouses have racks inspected?

    Busy buildings with lots of forklift traffic benefit from a rack audit once or twice a year, plus a look any time a strike is reported. We give you a written list after each walk-through.

  • Can you move racking from an old building to a new one?

    Yes. We tear down, check every part, move and reinstall it, and replace anything too damaged to reuse.

  • Do you install mezzanines too?

    Yes. We install and repair mezzanines, and we also service and install conveyors, mechanical and electrical.

  • Which areas near Clermont do you cover?

    Minneola, Groveland, Montverde, Mascotte, Winter Garden and Four Corners, plus the rest of Central Florida.

Book a Clermont Rack Walk-Through

Tell us how many bays, what got damaged or what you are building, and we will set a time for rack installation and repair Clermont crews can start on.

8am to 5pm, seven days. 24-hour emergency line.