Pallet racking · Osceola County
Rack Installation and Repair in Kissimmee, FL
Conveyor Tek handles the rack installation and repair Kissimmee warehouses depend on, from one bent upright in a supply room off US-192 to full rows of new pallet rack installation in the industrial pockets along John Young Parkway. We are family and veteran-owned, based in Lakeland, and the crew comes to your building.
Todd Bixby has been doing this work since 1997. If a forklift just clipped a column and you are wondering whether the bay is still safe to load, call first and load later.
Bay 01
New Pallet Racking for Kissimmee Distribution Space
A lot of Kissimmee storage feeds the tourist economy: restaurant supply, hotel linens, gift shop stock for the attraction corridor. That freight turns fast and it spikes hard at spring break, through the summer and again before the holidays. Racking has to be laid out for that pace, with aisles your lift trucks can actually turn in and beam levels set to the pallets you really receive.
Our warehouse rack installation work starts with the floor plan and the load. We set uprights, anchor them to the slab, hang beams at the heights you need and add row spacers, wire decking and end-of-aisle guards where the layout calls for them. For bigger buildings we also handle industrial rack installation across multiple rows and phases, so receiving keeps running while the back half goes up.
- Selective pallet racking for mixed SKUs and fast pick faces
- Storage rack installation for overflow and seasonal stock
- Relocating and reconfiguring racks you already own
Most people who search rack installation near me want one thing: racking installers who show up on the day they said. That is the whole job, and rack installation and repair Kissimmee crews do right should not leave you guessing.
Bay 02
Kissimmee Rack Repair After Forklift Strikes
Bent steel does not get safer with time. An upright with a kink, a torn brace or a beam that dropped a connector needs to come out of service until it is fixed. Our damaged rack repair covers replacing uprights, swapping bent beams, re-anchoring base plates and putting back missing safety locks.
We do not heat and straighten damaged columns. We replace them. That is the standard for pallet rack repair, and it is the only way a repaired bay carries its rated load again.
If you typed rack repair near me from a dock office in Kissimmee, here is the honest picture: we come from Lakeland, and anyone who has driven I-4 past the Disney exits knows that traffic rarely behaves. Call before you load anything, and we will tell you what to unload and block off while our rack repair services crew is on the way. Warehouse racking repair goes quicker when the damaged bay is already empty.
Bay 03
Rack Inspection Services Before Peak Season in Osceola County
The worst time to find a cracked base plate is the week the trucks double. Our rack inspection services walk every aisle, check uprights, beams, connectors, anchors and load signs, and hand you a written list of what needs attention and what can wait.
Plenty of Kissimmee operations schedule that walk-through in late summer, ahead of the fall and holiday build. If an insurer or a corporate safety team wants it documented, we can turn the walk-through into a formal rack audit with each problem tied to a location.
Bay 04
Mezzanines and Conveyors Beside Your Kissimmee Racks
Racks rarely live alone. If you need a mezzanine over the pick area or the conveyor feeding your rack rows keeps jamming, the same call covers it. We do conveyor repair on the same visit, mechanical and electrical, so you are not juggling three contractors for one aisle.
Smaller parts rooms get attention too. Warehouse shelving installation for bins and hand-pick items sits right next to the pallet work in most buildings we visit. One crew, one schedule, rack installation and repair Kissimmee managers can book with a single phone call.
Why Kissimmee Warehouse Managers Hand Us Their Racking
Buyers here vet a contractor before letting anyone near a loaded rack. These are the reasons rack installation and repair Kissimmee customers give for calling us back.
Veteran-owned and family-run
Conveyor Tek is owned by Todd Bixby, a veteran. You talk to the owner, not a call center.
Hands-on since 1997
Todd has worked in material handling since 1997 and started Conveyor Tek in 2021 to do it his way.
Racks and conveyors under one roof
Rack repair, rack installation, rack audits, mezzanines and conveyor service, all from the same number.
Phones answered around the clock
Regular hours run 8am to 5pm every day, and the emergency line stays open 24 hours for a rack that cannot wait.
Rack Crews Across Kissimmee and the 192 Corridor
From Lakeland we run I-4 east and drop onto US-192, so Kissimmee, Celebration and Hunters Creek are a straight shot and St. Cloud is just down the road. If you were searching for pallet racking installation near me or rack installation and repair near me anywhere in Osceola County, we cover it.
West of here we keep rack crews in Clermont busy along US-27, and a few miles east on 192 we also take on rack installation and repair in St. Cloud.
- Kissimmee
- St. Cloud
- Celebration
- Hunters Creek
- Poinciana
- Buenaventura Lakes
Questions from Kissimmee
Kissimmee Racking Questions, Answered Straight
Not here? Call (863) 877-7971 and ask Todd directly.
-
How soon can you get a rack crew to Kissimmee?
We are based in Lakeland, roughly 50 miles west on I-4. Call (863) 877-7971 between 8am and 5pm any day, or use the 24-hour emergency line after hours. We will give you a real arrival time on the phone and tell you what to unload and block off until we get there.
-
Can we keep using a rack after a forklift hits it?
Not if an upright is bent, kinked or torn, or a beam has lost a connector. Unload that bay and the bays beside it, rope off the aisle and call us. Damaged components get replaced, not straightened.
-
Do you install new pallet racking as well as repair it?
Yes. We lay out, install and anchor new pallet racking, add beam levels, decking and guards, and relocate or reconfigure racking you already own.
-
Can you inspect our Kissimmee warehouse racks without a repair job?
Yes. A rack audit is a walk-through of every aisle with a written list of damage and wear, ranked by what needs fixing first. Many customers book it ahead of their busy season.
-
What should we have ready before a rack installation?
A floor plan or rough sketch, your heaviest pallet weights, the reach of your forklifts and a clear floor where the racks will go. If you are reusing old racking, have the beams and uprights staged so we can check them first.
-
Can you work weekends so we do not lose a shift?
Our regular hours are 8am to 5pm seven days a week, so Saturday and Sunday installs and repairs are on the table. Tell us when your slow day is and we will plan around it.
-
Do you also work on conveyors and mezzanines?
Yes. Conveyor Tek handles conveyor service and installation, both mechanical and electrical, plus mezzanine installation and repair. One crew can cover the racks and the equipment around them.
-
Which areas around Kissimmee do you cover?
Kissimmee, St. Cloud, Celebration, Hunters Creek, Poinciana and Buenaventura Lakes, plus the rest of Central Florida. We go where we are needed.
Put a Kissimmee Rack Job on the Calendar
Rack installation and repair Kissimmee jobs start the same way: tell us what got hit or what you need built, and roughly how many bays. We will talk through the rack installation services you need and set a time to come out.
8am to 5pm, seven days. 24-hour emergency line.
