Factory floors and older warehouses · Hialeah

Rack Installation and Repair in Hialeah, FL

Hialeah makes things. Food, furniture, clothing, packaging. And the buildings doing that work are often older, with racking that came from three different auctions. Conveyor Tek handles rack installation and repair Hialeah shops need, whether that means a clean new layout or sorting out a mix of mismatched steel. Everything runs through our rack installation and repair service.

We are family and veteran-owned, based in Lakeland, and owner Todd Bixby has been in material handling since 1997.

Three workers standing in an aisle of orange pallet racking

Sorting Out Mixed-Brand Racking in Older Hialeah Buildings

A lot of Hialeah racking was bought used, a few bays at a time. Teardrop uprights from one maker, beams from another, a row of structural rack someone picked up when a plant closed. It looks fine until a beam does not seat right or a connector is half engaged.

We identify what you actually have, flag the combinations that should not be mixed, and replace parts with compatible ones. Sometimes the answer is warehouse rack repair on a few bays. Sometimes it is pulling a row and starting over. Either way you get a straight answer, and it is the most common rack installation and repair Hialeah job we see.

Rack Installation for Low-Clearance Hialeah Warehouses

Plenty of buildings off West Okeechobee Road and in the older industrial blocks were built before anybody stacked pallets 30 feet high. Lower clear heights, columns in odd places, docks that do not line up with the aisles. Warehouse racking installation in these buildings is about fitting in every usable level without crowding the sprinklers or the lights.

Our pallet racking installers plan around all of it, then set, anchor and level a racking system installation that uses the space you actually have.

  • Beam levels planned to the inch under low roofs
  • Row layouts that work around building columns
  • Guards at dock doors and tight turns

Hialeah Rack Upright Repair and Beam Swaps

Tight aisles and older forklifts mean racks get hit. Rack upright repair replaces the damaged column section or frame. Rack beam replacement swaps out bent, cracked or unlocked beams. Our pallet rack repair crew uses parts matched to your existing system, which matters even more when the racking is a mix of brands.

If you were searching rack repair near me from a Hialeah factory floor, here is the first step: unload the damaged bay and the bays next to it, block the aisle and call us with photos. We will tell you what is safe while our truck heads south.

Pallet Rack Reconfiguration as Hialeah Product Lines Change

Manufacturers change products, and storage has to follow. Pallet rack reconfiguration resets beam heights, changes bay widths and updates load signs so the racking matches today's loads, not last decade's. A fair share of rack installation and repair Hialeah manufacturers book with us starts as a reconfiguration and turns into a few new bays.

A written inspection is a smart first step. Hialeah rack audits document every upright, beam, anchor and load sign, and our rack inspection program explains what gets checked. An insurance carrier or landlord asking about racking safety will want to see that report.

Hialeah Mezzanines and Conveyor Repair for Production Floors

When the floor is full, go up. We install and repair mezzanine platforms over production and storage areas. On the line itself, we handle conveyor belt repair in Hialeah and conveyor system installation, mechanical and electrical, so your racks and your lines keep up with each other.

Why Hialeah Manufacturers Trust a Family-Run Rack Contractor

Hialeah runs on family businesses, and so do we. Here is what rack installation and repair Hialeah manufacturers get from our crew.

  1. Family and veteran-owned

    Conveyor Tek is a family business with a veteran owner. You deal with the people doing the work.

  2. Nearly 30 years of racking

    Todd Bixby has been in material handling since 1997 and has seen just about every brand of rack out there.

  3. Parts that actually fit

    We match replacement components to your racking, so repaired bays carry their rated load.

  4. Planned trips, full trucks

    Hialeah is a scheduled run from Lakeland. We confirm sizes first and bring what the job needs.

Rack Service From Hialeah to Miami Lakes and Medley

Hialeah has its own street grid, so West 4th Avenue here is nowhere near anything numbered the same in Miami. We know the difference. We cover Hialeah from the Palmetto to the flamingos at Hialeah Park, plus Hialeah Gardens, Miami Lakes, Medley, Miami Springs and Opa-locka. Searching pallet rack installation near me anywhere in north Miami-Dade gets you this crew.

South and east of here, we also handle rack installation and repair in Miami, from Doral to the airport freight district.

  • Hialeah
  • Hialeah Gardens
  • Miami Lakes
  • Medley
  • Miami Springs
  • Opa-locka

Hialeah Rack Repair and Installation Questions

  • How soon can you get to Hialeah?

    Our shop is in Lakeland, about three and a half hours away on the Turnpike. Call (863) 877-7971 between 8am and 5pm any day, or use the 24-hour emergency line, and we will give you a real arrival time.

  • Can you repair racking made by different manufacturers?

    Yes. We identify each component and replace parts with compatible ones. If two styles should not be mixed, we tell you and give you options.

  • What should we do right after a rack is damaged?

    Unload the damaged bay and the bays on either side, keep everyone out of the aisle and call us. Do not straighten bent steel.

  • Our Hialeah building has low ceilings. Can racking still work?

    Yes. We plan beam levels around your clear height, sprinklers and lights, and lay out rows around building columns.

  • Do you replace damaged uprights?

    Yes. Damaged uprights get new column sections or new frames, and bent beams are replaced, not bent back.

  • How often should our racks be inspected?

    Once or twice a year for most Hialeah warehouses and factories, plus any time a strike is reported.

  • Can you change our racking for a new product line?

    Yes. We move beam levels, change bay widths and update load signs so the racking fits your current loads.

  • Do you also work on conveyors and mezzanines?

    Yes. We service and install conveyors, mechanical and electrical, and we install and repair mezzanines.

Send Us Photos of Your Hialeah Racking

A few pictures of the damage or the space, plus the bay count, is all we need to quote rack installation and repair Hialeah shops can schedule with confidence.

(863) 877-7971 Send photos of the damage

Open 8am to 5pm, seven days. 24-hour emergency line.