East Osceola racking · US-192

Rack Installation and Repair in St. Cloud, FL

Conveyor Tek handles rack installation and repair St. Cloud businesses need without the big-city runaround. Building supply yards, beverage distributors, storage operators and the new commercial space going up along Narcoossee Road all get the same thing from us: racking that goes in square and gets fixed right when it takes a hit. Start with our Florida rack installation work, or call and describe the job.

We are family and veteran-owned, based in Lakeland, and owner Todd Bixby has been in material handling since 1997.

Narrow aisle between tall stocked pallet racks in a warehouse

Pallet Rack Installation Sized for St. Cloud Warehouses

Most buildings in St. Cloud are not million-square-foot distribution centers. They are 10,000 to 40,000 square foot shops and warehouses where one bad layout decision eats a quarter of the floor. So rack installation and repair St. Cloud jobs start with a tape measure, and any racking system installation starts on paper. We measure, plan aisle widths around the trucks you actually own, and set the racking so every bay earns its spot.

That covers racking for a first warehouse, warehouse racking installation for an expansion, and long-load rack for lumber and pipe at supply yards. Every frame gets anchored and plumbed, every beam gets its locks.

St. Cloud Rack Upright Repair and Beam Replacement

A forklift clips an upright, the steel folds at knee height, and the whole bay is suspect. Rack upright repair means replacing the damaged section or frame. Rack beam replacement swaps out beams that are bowed, twisted or missing safety clips. Our rack repair service brings matching parts so the bay goes back to work. Pallet rack repair is the most common rack installation and repair St. Cloud call we get, and warehouse rack repair done this way holds up.

Until we get there, unload the damaged bay and its neighbors and keep people clear. If you searched rack repair near me from St. Cloud after a bad morning on the dock, call and we will tell you what to unload while we drive over.

Racking Moves and Reconfiguration for Growing St. Cloud Businesses

St. Cloud keeps filling in toward Harmony and Lake Nona, and businesses here outgrow buildings fast. When you move, we tear down, check every part, haul it and reinstall it in the new space. When you stay put but the product changes, pallet rack reconfiguration resets beam levels and bay spacing to match. Both are a big part of the rack installation and repair St. Cloud owners call us for, and both run through our rack installation and repair team.

St. Cloud Rack Inspections With a Written Punch List

Small operations rarely have a safety department walking the aisles. A rack audit does that job. Rack audits in St. Cloud cover uprights, beams, connectors, anchors and load signs, and you get the results in writing. If an insurance carrier ever asks what you are doing about racking safety, that report answers it. The steps are spelled out on our rack audit overview.

Mezzanine and Conveyor Work for East Osceola Facilities

Need more room without a bigger lease? A mezzanine installation adds a second level over offices or packing tables. We also handle conveyor repair and maintenance, and conveyor installation in St. Cloud for operations ready to stop hand-carrying cartons.

Why a Veteran-Owned Crew Fits St. Cloud

St. Cloud was founded in 1909 as a home for Union Civil War veterans, which is why so many downtown avenues carry state names. A veteran-owned rack contractor feels right at home here, and the rest of the reasons are practical.

  1. Owner-run, start to finish

    Conveyor Tek is family and veteran-owned. The person quoting the job knows how racking goes together.

  2. Experience back to 1997

    Todd Bixby has spent nearly 30 years in material handling, from racking to conveyors to mezzanines.

  3. Close enough to come back

    St. Cloud is a short run from our Lakeland shop, so follow-up visits and add-on bays are easy to schedule.

  4. Seven-day hours

    We work 8am to 5pm every day and keep a 24-hour line for damage that cannot wait until morning.

Racking Service From St. Cloud to Harmony and Lake Nona

We come in on US-192, past the Kissimmee strip and over to East Lake Toho. From there it is a short hop down to Harmony, up Narcoossee Road toward Lake Nona, and out to Holopaw on the cattle-country end of the county. Searching pallet rack installation near me anywhere in east Osceola lands you with the same crew.

Just west, we also handle Kissimmee rack installation and repair along the 192 corridor.

  • St. Cloud
  • Kissimmee
  • Harmony
  • Narcoossee
  • Lake Nona
  • Holopaw

St. Cloud Rack Installation and Repair FAQs

  • How quickly can you reach St. Cloud?

    It is about 75 minutes from our Lakeland shop by I-4 and US-192. Call (863) 877-7971 between 8am and 5pm any day, or use the 24-hour emergency line, and we will give you a real arrival time.

  • Do you take on small rack jobs?

    Yes. A handful of damaged bays or a single new row is a normal job for us. Size does not change how carefully it gets done.

  • What should we do with a bent upright?

    Unload that bay and the bays beside it, block the aisle and call. Do not straighten the upright or keep loading the bay.

  • Can you move our racks to a new building in St. Cloud?

    Yes. We take the racking down, inspect every piece, move it and reinstall it in the new layout. Damaged parts get replaced before they go back up.

  • Do you install racking for lumber and pipe?

    Yes. We install long-load racking for building supply yards and shops along with standard pallet racking.

  • How often should we have our racks inspected?

    Once a year works for many smaller St. Cloud warehouses, twice a year for busy ones, and any time a strike gets reported.

  • Can you change our beam heights?

    Yes. We reconfigure racking to fit new pallet heights or product mixes, then update the load signs.

  • Do you handle conveyors and mezzanines too?

    Yes. We install and repair mezzanines and service and install conveyor systems, mechanical and electrical.

Book St. Cloud Rack Work This Week

Tell us what got hit or what you are setting up, add a photo or two, and we will schedule rack installation and repair St. Cloud businesses can count on.

(863) 877-7971 Send photos of the damage

Open 8am to 5pm, seven days. 24-hour emergency line.