Port city racking · Duval County

Rack Installation and Repair in Jacksonville, FL

Conveyor Tek does rack installation and repair Jacksonville distribution centers can plan around: new pallet racking set plumb and anchored, plus fast fixes when a lift truck finds an upright. The work runs through our rack installation and repair service, out of our shop in Lakeland.

We are family and veteran-owned, and owner Todd Bixby has been in material handling since 1997.

Two workers in hi-vis vests checking pallet racking above roller conveyors

Pallet Racking for Westside and Northside Jacksonville Warehouses

Most of the new big-box space in town sits out by Pritchard Road, Cecil Commerce Center and the I-295 loop on the Northside. Those buildings open with bare slab and a move-in date, and that is where most rack installation and repair Jacksonville jobs begin. For a full racking system installation, we lay out the rows, check clear height against the sprinkler heads, set and anchor every upright, and hang beams at the levels your pallets actually need.

That is warehouse racking installation done in an order that lets you start receiving on finished aisles while we keep working on the rest. Our racking installation crews handle selective rack, double-deep runs and the wire decking, row spacers and column guards that go with them.

  • Layouts sized to your forklifts and pallet footprint
  • Anchoring and shimming on slabs that are not dead level
  • Phased installs so the dock never fully shuts down

Rack Reconfiguration for JAXPORT Import Freight

Freight moving off Blount Island and Dames Point changes shape all the time. A new import account shows up with taller loads or a different pallet, and the beam levels that worked last quarter now waste a whole tier. Pallet rack reconfiguration fixes that. We drop or raise beams, re-space bays and re-sign the load plates so the numbers on the rack match what is sitting on it.

If the new freight needs more depth instead of more height, we price both and let you pick. Plenty of rack installation and repair Jacksonville 3PLs ask for starts as a reconfiguration and ends with a few new bays at the end of a row.

Jacksonville Upright and Beam Repair After Forklift Strikes

A hit upright is the most common call we get. The steel creases at the first beam level, a brace tears, an anchor pulls out of the concrete. Rack upright repair means cutting out the damaged column section or replacing the frame, never heating and bending it back. Rack beam replacement covers beams that have dropped, twisted or lost a safety lock.

Our rack repair team brings replacement components sized to your existing system, so pallet rack repair usually wraps up in one visit. Until we arrive, unload the damaged bay and the bays on each side and tape off the aisle. If you are looking up rack repair near me from a Duval County dock, call first, describe the damage, and we will tell you what to unload before we get there.

Written Rack Inspections for Duval County Distribution Centers

High-volume buildings take more hits than anyone reports, and catching them early keeps warehouse rack repair small. A walk-through finds them. Our Jacksonville rack audits check every upright, beam connector, anchor and load sign, then hand you a written list split into fix-now and watch items.

Insurance carriers and landlords sometimes ask for that report before renewal, so it pays to have one on file. You can read more about what the walk covers on our Florida rack inspection page.

Mezzanines and Conveyor Lines Beside Your Jacksonville Racking

When the floor runs out, the next square footage is overhead. We put in warehouse mezzanines above pack-out stations and offices, and we set up and repair the conveyors that feed your racking. That includes new conveyor installation for pick modules where the racks and the conveyor have to line up to the inch.

Why Jacksonville Warehouse Managers Call a Veteran-Owned Rack Crew

Jacksonville covers more ground than any other city in Florida, and you need a contractor who will actually make the drive. Here is what you get with rack installation and repair Jacksonville crews from our shop.

  1. Straight answers from the owner

    Conveyor Tek is family and veteran-owned. The person on the phone knows racking and can tell you what the job takes.

  2. Material handling since 1997

    Todd Bixby has been installing and fixing racking and conveyors for nearly three decades.

  3. Damaged steel gets replaced

    Bent uprights and beams come out. New components go in. The bay carries its rated load again.

  4. Trips planned around your shifts

    Jacksonville is a scheduled run for us, so we line up parts and crew before we leave and work the hours that keep your dock moving.

Racking Work Across Jacksonville and the First Coast

Jacksonville is bigger than it looks on a map. You can drive 30 miles and never leave city limits, from the Westside parks to the Northside around the airport. We cover all of it, plus Orange Park and Middleburg down US-17, Yulee across the Nassau line, Baldwin out west and Jacksonville Beach. If you searched pallet rack installation near me anywhere on the First Coast, this is the crew that shows up.

The same shop also handles rack installation and repair in Miami at the other end of I-95, and racking jobs in Bradenton on the Gulf side.

  • Jacksonville
  • Orange Park
  • Middleburg
  • Yulee
  • Baldwin
  • Jacksonville Beach

Jacksonville Rack Installation and Repair Questions

  • How soon can you get to Jacksonville?

    Our shop is in Lakeland, a little over three hours away by I-4 and I-95. Call (863) 877-7971 any day between 8am and 5pm, or use the 24-hour emergency line, and we will give you a real arrival window on the phone.

  • Do you install racking in new Jacksonville warehouses?

    Yes. We plan the layout, check clear heights and sprinklers, then set, anchor and level every frame. Phased installs let you receive on finished aisles while we work.

  • What should we do right after a rack gets hit?

    Unload the damaged bay and the bays on either side, block the aisle, and call us. Do not straighten a bent upright or reseat a beam that lost its lock.

  • Can you change beam heights for new import freight?

    Yes. Pallet rack reconfiguration means moving beams, re-spacing bays and updating load signs so the rack matches the loads that are on it now.

  • Do you replace damaged uprights or repair them in place?

    We replace damaged steel. A bent upright gets a new column section or a new frame, and damaged beams are swapped out. We do not heat and bend steel back into shape.

  • How often should a Jacksonville distribution center have its racks inspected?

    Busy buildings with steady forklift traffic do well with a rack audit once or twice a year, plus a look after any reported strike. Each audit ends with a written list.

  • Can you move our racking to a new building?

    Yes. We tear down, check every component, haul it, and reinstall it in the new layout, replacing anything too damaged to reuse.

  • Do you work on conveyors and mezzanines too?

    Yes. We install and repair mezzanines, and we service and install conveyor systems, both mechanical and electrical.

Get a Jacksonville Rack Job on the Calendar

Tell us the bay count, what got hit or what you are building, and send a couple of photos. We will line up parts and crew for rack installation and repair Jacksonville docks can count on.

(863) 877-7971 Send photos of the damage

Open 8am to 5pm, seven days. 24-hour emergency line.